Kalite likid ak kapasite 2019 Ford kamyon F 150 2WD V6-2.7L Turbo


Specifications 2019 Ford Truck F 150 2WD V6-2.7L Turbo

Quick reference tables for Fluid Types and Capacities 2019 Ford Truck F 150 2WD V6-2.7L Turbo. This information is provided by Sparky Express for DIY-ers, asistans bò wout la providers and Ford enthusiasts in general.

Motè


Atik Spesifikasyon
Displacement 2.7L (4V) (164 CID)
Non silenn 6
Fè / konjesyon serebral 83/83 mm (3.268/3.268 in)
Tire lòd 1-4-2-5-3-6
Etensèl ploge 12405
Etensèl ploge espas 0.028–0.031 in (0.7–0.8 mm)
Konpwesyon rapò 10: 1
Pwa motè 409 Lb (189 Kg)




  Lubricant


Atik Spesifikasyon
Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-30 Super Premium Motor Oil (Canada) XO-5W30-QSP (US); CXO-5W30-LSP12 (Canada)




  Kapasite lwil motè


Atik Spesifikasyon
Service fill including filtre lwil 6.0 qt (5.68 L)




  Lwil presyon

REMAK: The following oil pressure readings are acquired using a scan tool and monitoring the EOP_PRESS PID.


Atik Spesifikasyon
Reading 1: minimòm average oil pressure @ 2,000 rpm after 15 secs with engine at normal operating temperature and transmission in Park 21 psi (144.8 kPa)
Reading 2: minimòm average oil pressure @ 2,000 rpm after 15 secs with engine at normal operating temperature and transmission in Park (Oil Pressure Control Solenoid connector disconnected) Reading 1 value plus 8 psi (55.1 kPa)




  Cylinder Head and Valve Tren


Atik Spesifikasyon
Silenn tèt gasket surface flatness Flat within 0.08 mm (0.003 in) length end to end, area 150 mm (5.9 in) x 150 mm (5.9 in) (or full width) should be less than 0.05 mm (0.002 in)
Valv gid bore inner diameter 0.2155–0.2167 in (5.473–5.503 mm)
Valve stem diameter - intake 0.2138–0.2145 in (5.43–5.448 mm)
Valve stem diameter - exhaust 0.2133–0.2140 in (5.417–5.435 mm)
Valve stem-to-guide clearance - intake 0.0010–0.0029 in (.025–.073 mm)
Valve stem-to-guide clearance - exhaust 0.0015–0.0034 in (.038–.086 mm)
Valve head diameter - intake 1.2748–1.2843 in (32.38–32.62 mm)
Valve head diameter - exhaust 1.1094–1.1189 in (28.18–28.42 mm)
Valve face runout 0.0000–0.0020 in (–.05 mm)
Valve face angle 45.5 — 46.0 degrees
Valve seat runout 0.0000–0.0008 in (–.02 mm)
Valve seat angle 44.5 — 45.5 degrees
Valv sous free length (approx.) 2.0394 in (51.8 mm)
Valv sous compression pressure (N @ spec. length) 553 — 607 N @ 27.0 mm
Valve spring installed height — Exhaust 1.4173 in (36 mm)
Valve spring installed height — Intake 1.4567 in (37 mm)
Valve spring installed height pressure (N @ spec. length) 286 — 318 N @ 37 mm
Valve spring installed pressure — service limit 5 % force loss @ 37 mm




  Hydraulic Lash Adjuster


Atik Spesifikasyon
Diameter — intake 0.4720–0.4724 in (11.989–12 mm)
Diameter — exhaust 0.4720–0.4724 in (11.989–12 mm)
Clearance-to-bore 0.0004–0.0020 in (.01–.051 mm)
Tonbe plat atè lash adjuster espas 0.0138–0.0335 in (.35–.85 mm)




  kam


Atik Spesifikasyon
Theoretical valve lift (intake) @ 0 lash 0.3937 in (10 mm)
Theoretical valve lift (exhaust) @ 0 lash 0.3543 in (9 mm)
Lobe lift - intake 0.2067 in (5.25 mm)
Lobe lift - exhaust 0.1870 in (4.75 mm)
Camshaft journal bore inside diameter — 1st journal 0.0011–0.0028 in (.027–.072 mm)
Camshaft journal bore inside diameter — intermediate journals 0.0011–0.0028 in (.027–.072 mm)
Camshaft bearing outside diameter — 1st journal 1.3764–1.3772 in (34.96–34.98 mm)
Camshaft bearing outside diameter — intermediate journals 1.1263–1.1273 in (28.607–28.633 mm)
Fen jwe 0.0010–0.0059 in (.025–.15 mm)




  Silenn blòk


Atik Spesifikasyon
Silenn fè dyamèt 3.268–3.268 in (83–83.018 mm)
Cylinder bore roundness 0.0004 in (.01 mm)
Cylinder bore taper 0.0005 in (.013 mm)
Block main bore roundness 0.0003 in (.007 mm)
Main bearing bore inside diameter 2.850–2.851 in (72.402–72.422 mm)
Head gasket surface flatness Flat within 0.150 mm (0.005 in) overall 0.050 mm (0.001 in) per 150 mm (5.905 in) x 150 mm (5.905 in) 0.025 mm (0.0009 in) per 25 mm (0.98 in) x 25 mm (0.98 in)




  Arbr


Atik Spesifikasyon
Main bearing journal diameter 2.6568–2.6576 in (67.483–67.503 mm)
Main bearing journal-to-main bearing clearance 0.0020–0.0024 in (.05–.062 mm)
Koneksyon baton journal diameter 2.2037–2.2044 in (55.973–55.993 mm)
Crankshaft end play 0.0020–0.0115 in (.051–.291 mm)




  Piston and Connecting Rod


Atik Spesifikasyon
Piston diameter - single grade 3.2648–3.2654 in (82.926–82.94 mm)
Piston-to-cylinder bore clearance 0.0024–0.0036 in (.06–.092 mm)
Bag Piston end gap - compression (top, gauge diameter) 0.0110–0.0130 in (.28–.33 mm)
Piston ring end gap - compression (bottom, gauge diameter) 0.0157–0.0276 in (.4–.7 mm)
Piston ring end gap — oil ring (steel rail, gauge diameter) 0.0059–0.0177 in (.15–.45 mm)
Piston ring groove width - compression (top) 0.0484–0.0492 in (1.23–1.25 mm)
Piston ring groove width — compression (bottom) 0.0406–0.0413 in (1.03–1.05 mm)
Piston ring groove width - oil ring 0.0799–0.0807 in (2.03–2.05 mm)
Piston ring width - upper compression ring 0.0461–0.0469 in (1.17–1.19 mm)
Piston ring width - lower compression ring 0.0382–0.0390 in (.97–.99 mm)
Piston ring-to-groove clearance (upper and lower compression rings) 0.0016–0.0031 in (.04–.08 mm)
Piston piston bore diameter 0.8663–0.8665 in (22.004–22.008 mm)
Piston pin diameter 0.8659–0.8661 in (21.995–22 mm)
Piston pin length 1.9646–1.9764 in (49.9–50.2 mm)
Piston pin-to-piston fit 0.0002–0.0005 in (.004–.013 mm)
Piston-to-connecting rod clearance 0.1772 in (4.5 mm)
Connecting rod-to-pin clearance - standard 0.0006–0.0012 in (.015–.03 mm)
Connecting rod pin bore diameter 0.8667–0.8671 in (22.015–22.025 mm)
Connecting rod length (center-to-center) 5.7465–5.7496 in (145.96–146.04 mm)
Connecting rod maximum allowed bend 0.0008 in (.02 mm)
Connecting rod maximum allowed twist 0.0016 in (.04 mm)
Connecting rod bearing bore diameter 2.3397–2.3402 in (59.428–59.442 mm)
Connecting rod bearing-to-crankshaft clearance 0.0017–0.0035 in (.042–.088 mm)
Connecting rod side clearance (assembled to crank) - standard 0.0049–0.0148 in (.125–.375 mm)
Connecting rod side clearance (assembled to crank) - service limit 0.0049–0.0148 in (.125–.375 mm)